Home > Select Brand > Thuren Fabrication > Thuren - Steering > Thuren - Track Bar >

THUREN 2007.5-2013 TRACKBARS T16
THUREN 2003-2012 TRACKBARS TB16


 
Our Price: $340.00

Product Code: TF-4LFTB-16MM
Qty:

Description Technical Specs
 
Thuren Fabrication Track Bar fits 2003-2012 Dodge Ram solid front axle trucks. The ORIGINAL aftermarket 3rd gen trackbar, specifically brought to market designed to kill DEATH WOBBLE.
Made from 1.5" OD 3|8" wall 1026 DOM Mandrel bent
Heavy duty FK ROD ENDS 7|8" shank chromoly heim at axle.
NEW special hard 75D Durometer bushing, with stainless sleeve
Provides much improved steering feel and Improved suspension feel.
Easy bolt in replacement


Being fine-tuned over the last 5 years, the Thuren Fabrication track bar makes a HUGE difference in steering and suspension feel. Add a lift, bigger tires, or some performance Dodge Suspension Components and it becomes one of the best handling improvements you can make. Feedback through the wheel becomes almost nonexistent, and overall suspension and steering performance and safety is improved. Each bend is precisely placed and designed to reduce flex, which is one of the biggest factors contributing to bad performance from other units. Thuren Fabrication uses DOM tubing for its resilient qualities (unlike Chromoly), being that some flex IS going to happen, with such a heavy vehicle weight. Contrary to what you may think, any defection in the trackbar bushings reduces ride quality and safety, along with ADDING to road feedback. Being the first trackbar to market for the 3rd gen Dodge Rams, specifically designed to combat Death Wobble and improve handling and safety, you know you will get the best possible product. While Death Wobble can be a tough situation to combat, as the trackbar alone is not the only source, it is usually the first place to start.

THUREN FABRICATION POWDERCOATING IS THE HIGHEST QUALITY YOU CAN GET! Each trackbar is sand blasted, Zinc Primer coated, hand sanded, then heavily coated with Gloss Black color coat. Powdercoating option can add up to one week to normal ship dates.

IMPORTANT! MID 2007, SOME TRACKBARS CAME FROM FROM THE FACTORY WITH A 14MM BOLT AT THE FRAME, AND A 16MM BOLT
AT THE AXLE. IT IS HIGHLY SUGGESTED TO CHECK THE ACTUAL HOLE IN THE FRAME AS IT HAS BEEN REPORTED DODGE USED
THE 14MM BOLT IN A 16MM HOLE ON SOME TRUCKS. PLEASE CONTACT STRAPT PERFORMANCE FOR MORE INFO.

Share your knowledge of this product. Be the first to write a review »