Home > Suspension >

Mopar Upper Control Arm Bolt
Mopar Upper Control Arm Bolt


 
Our Price: $7.95

Product Code: MOP-6509615AA
Qty:

Description
 
94-12 Dodge 2500/3500 and 06-12 Dodge 1500 Megacab Mopar Upper Control Arm Bolt

This bolt is a real pain to remove if you are upgrading your Control Arms. If you don't have to nor want to drop your exhaust while installing or servicing a set of Carli or Thuren Control Arms you will want this bolt. We have found that it makes installation of Control Arms quite a bit faster. Simply loosen this bolt and cut it with a saw on the inner frame side to remove. When using this method of install you will have to reverse the bolt and in doing so torque it from the inner frame side. This bolt should be torqued at the nut and getting to it without dropping the exhaust is pretty much impossible. A prybar can make this a little easier by holding the exhaust away from the frame just enough to get a 21mm socket on the nut.

Share your knowledge of this product. Be the first to write a review »