Home > Steering >

Mopar Dodge Ram 2500/3500 Steering Linkage Upgrade 52122362AL
Mopar Dodge Ram 2500/3500 Steering Linkage Upgrade 52122362AL


 
Our Price: $457.00

Product Code: MOP-52122362AL


Dodge Vehicle*:


Qty:  
Description
 
Brand New OEM Mopar Dodge Ram 08.5 Steering Linkage Upgrade 52122362AL

This kit was designed by Mopar to help with Front End Death Wobble found on many 2003-2008 Dodge Ram 2500 & 3500 Pickups. The Mopar 2008.5 Dodge Ram Steering Linkage Upgrade Kit changes the front end steering linkage form the Y Style to the new STRONGER T Style design. This is an Original Equipment Part (OEM).

Death Wobble occurs in the Dodge ram trucks when one or more of the following conditions are present.
  • Tires of incorrect load rating are installed.
  • Incorrect tire pressures
  • Track Bar ends have excessive play
  • Balls Joints have excessive play
  • Steering Gear Box is worn
  • Tie Rods are worn

Call and speak to one of our representatives if you think you need to upgrade to the new T style steering upgrade kit.

This kit is for the steering linkage only! You will also need a new pitman arm and steering damper. We can supply you with the new pitman arm at an additional fee. We also recommend at this time to upgrade your steering stabilizer since your old one will not work. Both Carli Suspension or Thuren Fabrication make excellent replacement steering stabilizers. Both are designed to work with the new T- style steering linkage.

We try to keep up with the various part numbers Mopar uses on these steering linkages. Depending on your search you will find a variety of part numbers but we will always ship the latest version. 52122362AG, 52122362AH, 52122362AI, 52122362AJ, 52122362AL, 52122362AK, 52122362AL is the most current version.

Fitment:
03-12 Dodge Ram 2500 and 3500 4x4 Gas and Diesel
05-09 Dodge Ram 1500 Megacab 4x4
00-02 Dodge Ram 2500 and 3500 4x4 Gas and Diesel (Steering Stabilizer Mounts will need to be modified)

NOTE: MOPAR part # 68039930AA Pitman Arm is necessary for trucks built before March 1st 2008. This pitman arm will provide the correct angles for the inner tie rod on the drag link as it cycles through the complete range of motion.

Mopar 2009 Steering Linkage Upgrade Torque Specifications

DESCRIPTION Ft Lbs
Pitman Arm Gear Shaft Nut 177
Drag Link to Pitman Arm 100
Drag Link to Tie Rod 100
Drag Link Adjuster Clamp 40
Tie Rod End to Knuckle 78
Tie Rod End Adjuster Clamp 40
Stabilizer Bar Link to Axle 50
Steering Damper to Axle or Linkage 75
Steering Damper Bracket U-Bolt Nuts 45
Track Bar to Axle - M16 Fastener 200
Track Bar to Frame - M16 fastener 200


Share your knowledge of this product. Be the first to write a review »