Home > Steering >

Extreme Overkill Fabrication - Dodge Full Crossover Steering
Extreme Overkill Fabrication - Dodge Full Crossover Steering


 
Alternative Views:


Our Price: $494.00

Product Code: EOF-FS


Dodge Vehicle*:


Qty:  
Description
 
NOTE: FOR VEHICLE WITH 6IN LIFT.

These steering kits replace the poorly designed and weak Dodge factory steering linkage. Whether you fly through the desert, crawl over rocks, or are just tired of replacing factory components, this kit is the custom solution you have been looking for. Each kit is custom designed based on the lift height of the truck and the needs of the customer. This kit also eliminates the constant toe alignment changes associated with suspension cycling in the Dodge Y-style steering. Bent to clear aftermarket differential covers, sway bar linkage, and limit strap anchors if you have them. Powder Coated Black

Important Notes
1. Knuckle and Pitman Arm holes are required to be drilled or reamed to ¾”
(Factory steering will not be usable after this modification)
2. There must be enough clearance on top of the passenger side steering arm to place a 1.5” diameter cylinder 2.75” tall on top of the steering arm without wheel interference or the crossover system will not fit.
3. Stock wheels will not work with this steering kit
4. No steering stabilizer mount is provided with this kit, a separate clamp on style mount is available
Features
  • 1.5 x .25 wall thickness DOM Tube
  • Grade 9 ¾” Fine Thread Bolts
  • Grade 9 All Metal Locking Nuts
  • Rod Ends rated at 42,000 lb minimum deformation strength
  • 7/8 Shank on all Rod Ends
  • Custom High Misalignment Safety Washers
  • Close Tolerance Load Distribution Washers
  • Custom Antiwobble Draglink Bushing

Share your knowledge of this product. Be the first to write a review »