|
|
|
|
|
|
|
|
|
|
|
|
|
|
Edge offers a wide variety of custom dash mounts for various vehicle makes and models. This adaptor allows the CTS to fit in these custom dash mounts.
|
Edge Brass Elbow
|
This adapter allows you to mount the CS or CTS products in a 2-1/16” Gauge Pillar Pod.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a -40°F to 230°F Waterproof 0.2” diameter sensor ready to plug into Edge’s Universal Sensor Input system.
|
Replacement thermocouple (EGT probe) fits all Juice with Attitude kits.
|
The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The EAS Temperature Sensor is a -40°F to 300°F 1/8” NPT supplied with the connectors to plug directly into Edge’s Universal Sensor Input System.
|
The Edge OBDII extension cable is ideal for customers looking to install and mount their CS/CTS device towards their vehicle's center console.
|
This pillar pod allows you to mount the CS, CS2, CTS and CTS2 products to your pillar for easy viewing and clean install.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With the Edge EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.
|
EAS Switch Addition: This is a tremendous new feature for truck owners! Customers can now hook up accessories like aftermarket lights, air compressors, etc. and engage them from the CTS.
|
With the Edge EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Edges all-new EAS Shift-On-The-Fly (SOTF) allows you to change custom tunes* on the fly utilizing the Insight CS2 or CTS2. The EAS SOTF part numbers cover the 2011-2016 Duramax, 2010-2018 Cummins, and 2011-2019 Power Stroke. Customers can now change tunes right on the screen! Many companies use a voltage signal to change between their 5 tune levels, when tuned with custom tuning software. Instead of drilling a hole in the dash, add the EAS SOTF accessory to an Insight monitor to control custom tunes* while driving down the road.
Here is how it works:
1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the power levels.
2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters.
3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the tune into your vehicle that enables the SOTF/DST functions.
4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen!
*Custom tunes created by 3rd party tuners and/or 3rd party custom-tuning software have no affiliation, approval or endorsement by Powerteq. Powerteq is not liable in any way for tunes created by 3rd party companies or 3rd party tuning software. The Powerteq EAS SOTF accessory is designed to replace a mechanical switch to enable changing power levels with the touch of a button on the Insight monitor.
|
Edge’s EAS Pressure Sensor is a 0 - 100 PSIg 1/8” NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605).
|
The Attitude CS upgrade kits are for existing Juice and legacy Attitude owners. An upgrade kit allows you to keep your existing Juice product and gives you the added style and control of the all-new Attitude CS.
|
|
|
